CERAMI-X Mini Microfiber Coating Applicator Sponge w/ Plastic Barrier

CERAMI-X Mini Microfiber Coating Applicator Sponge w/ Plastic Barrier

CERAMI-X Mini Microfiber Coating Applicators are compact, paint-safe applicator sponges designed for precise ceramic coating installs on tight areas and complex shapes. Each applicator features a soft microfiber outer face and an internal plastic barrier to help reduce product soak-in—so more coating stays on the surface where it belongs.

Why You’ll Love It

• Less product waste — internal plastic barrier helps prevent coating from saturating the sponge core.
• Mini size, max control — perfect for mirrors, A-pillars, bumpers, lips, door cups, and edges.
• Smooth, even application — microfiber face helps lay product uniformly to reduce high spots.
• Paint-safe — soft exterior is gentle on freshly corrected clear coat.
• Shop-efficient OPTION — 10-pack or 1 pc keeps installs consistent and helps avoid cross-contamination.

Specs

• Quantity: 10 pcs or 1 pc
• Size: 8 cm × 4 cm × 4 cm
• Construction: Microfiber outer + foam core with internal plastic barrier
• Best for: Ceramic coatings, trim coatings, and detailed/tight-area application

Pairs Well With

• REVEAL Pre-Coat Surface Prep
• Edgeless Microfiber Towels 420 GSM (12-Pack)

How To Use

1. Prep the surface: Correct as needed, then wipe down with a proper panel prep (e.g., REVEAL) to remove oils.
2. Prime the applicator: Apply a small line of coating to the microfiber face.
3. Apply: Work small sections using controlled, overlapping passes (cross-hatch where possible).
4. Level: Level per coating instructions with clean microfiber towels.
5. Replace: Swap applicators as they begin to load up, stiffen, or drag.

Notes: Single-use is strongly recommended for coatings to avoid cured residue and cross-contamination. Always follow the coating’s flash and leveling guidance.