ACME 2.0 - 2in1 FOAMER & SPRAYER

Industrial Pump Foamer & Sprayer

The Industrial Pump Foamer & Sprayer produces rich, clinging foam for faster, safer chemical dwell on vertical panels, wheels, tires and engine bays—without needing a pressure washer or compressed air. Built with chemical-resistant internals and an ergonomic pump/trigger, it’s a professional tool for pre-washes, APCs and wheel cleaners.

Key Features

• Dense, stable foam that increases contact time and reduces runoff.
• Chemical-resistant seals & internals for durability with professional detergents.
• Adjustable foaming nozzle to tune coverage from spot to wide fan.
• Pressure relief valve for safe depressurization after use.
• Wide, stable base and comfortable pump handle for all-day workflows.
• Black tank with fill markings for easy, repeatable dilutions. 2L reservoir.

Pairs Well With

• Contactless pre-wash: ROGUE — Contactless Alka Pre-Wash
• Wheel & tire cleaning: ORION — Wheel & Tire Cleaner
• Degreaser: DTOX — Heavy-Duty Water-Based Degreaser
• Labels for compliance: Product Labels

How To Use

1. Mix: Add water first, then the product at the desired dilution. Follow each chemical’s label. When you Foam, do not put more then 50% capacity to avoid any issues with the tank.
2. Pressurize: Close the cap and pump until firm resistance is felt.
3. Apply foam: Adjust the nozzle. Foam from bottom to top on wheels, tires, and panels to minimize streaking.
4. Dwell & agitate: Allow appropriate dwell time. Agitate with suitable brushes (e.g., Mag & Tire Brush, Wheel Spoke Brush).
5. Rinse: Rinse thoroughly. If pressure drops, re-pump as needed.
6. Depressurize & clean: Use the pressure-relief button after use, empty the tank, and rinse sprayer with clean water.

Notes: Do not use with strong solvents or flammable liquids. Avoid hot panels and direct sun. Always wear appropriate PPE and store depressurized.